Cassette blinds manual for measurement

15.08.2019

The cassette blinds are installed directly onto the window frame. We use curved c-type strips for the cassette blinds. The manual for measuring the cassette blinds depends on the type of window profile. The width of the blinds is a the outer dimension of the window strips.

Cassette blinds manual for measurement (square profile)

If it is possible to install the side strips with the tape on the window strips (the strip is not rounded or at a strong angle), measure the width starting from the window strip and frame (the width of the glass + 2 times the width of the strip). Example: If the width of the glass is 1000mm and the width of the window strip is 15mm, then the width is: 1000mm + 15mm + 15mm = 1030mm.

Cassette blinds manual for measurement (rounded profile)

If window strip is not suitable for installing blinds strip, measure the width starting from of the window strip and frame (the width of the glass + 2 times the width of the strip) and add another 16mm (8mm for intsall blinds strip on both sides). Example: If the width of the glass is 1000mm and the width of the window strip is 15mm, then the width is: 1000mm + 15mm + 15mm + 8mm + 8mm = 1046mm. Also, make sure that the window handle would not interfere the installation of blinds strip.

If you are afraid to get lost in the measurement, send us a picture of the window (info@en.rulo.ee) and we give you instructions how to measure such a window.