Cassette Blind Installation Guide

INSTALLING THE CASSETTE BLIND

STEP 1. Check the package contents

• Cassette blind 1 pc
• Side rails 2 pcs
• Chain stoppers 2 pcs
• Screws 4 pcs
• Installation guide 1 pc

STEP 2. Check the blind dimensions on the window by placing the blind onto the window frame. Also check the length of the side rails. The cassette must be 8 mm wider on each side than the L1 window measurement

STEP 3. Clean the window frame carefully with a damp cloth and then dry it with a dry cloth to ensure the blind’s adhesive tape attaches properly to the frame.

STEP 4. Remove the adhesive tape and end caps, then align the cassette straight on the window frame. The top edge of the cassette should be fixed to the line between the frame and the glazing bead (partly covering the glass). Using the chain, check that the blind runs straight. Insert screws into the upper screw holes of the cassette, avoiding overtightening.

STEP 5. Install the side rails. Remove the adhesive tape and attach the rail along the glazing bead so that it overlaps the fabric by at least 5 mm when the fabric is rolled out of the cassette. Insert the upper screws as well. Reattach the cassette end caps.

STEP 6. Roll the blind down and up, then install the chain stoppers at the desired positions to limit fabric movement. To install, press the supplied plastic stoppers between the chain links so that the blind cannot roll past the intended points.

For more information: www.rulo.ee / info@rulo.ee